/*
* Written by Doug Lea with assistance from members of JCP JSR-166
* Expert Group and released to the public domain, as explained at
* http://creativecommons.org/publicdomain/zero/1.0/
*/
package java.util.concurrent.locks;
import sun.misc.Unsafe;
/**
* Basic thread blocking primitives for creating locks and other
* synchronization classes.
*
* <p>This class associates, with each thread that uses it, a permit
* (in the sense of the {@link java.util.concurrent.Semaphore
* Semaphore} class). A call to {@code park} will return immediately
* if the permit is available, consuming it in the process; otherwise
* it <em>may</em> block. A call to {@code unpark} makes the permit
* available, if it was not already available. (Unlike with Semaphores
* though, permits do not accumulate. There is at most one.)
*
* <p>Methods {@code park} and {@code unpark} provide efficient
* means of blocking and unblocking threads that do not encounter the
* problems that cause the deprecated methods {@code Thread.suspend}
* and {@code Thread.resume} to be unusable for such purposes: Races
* between one thread invoking {@code park} and another thread trying
* to {@code unpark} it will preserve liveness, due to the
* permit. Additionally, {@code park} will return if the caller's
* thread was interrupted, and timeout versions are supported. The
* {@code park} method may also return at any other time, for "no
* reason", so in general must be invoked within a loop that rechecks
* conditions upon return. In this sense {@code park} serves as an
* optimization of a "busy wait" that does not waste as much time
* spinning, but must be paired with an {@code unpark} to be
* effective.
*
* <p>The three forms of {@code park} each also support a
* {@code blocker} object parameter. This object is recorded while
* the thread is blocked to permit monitoring and diagnostic tools to
* identify the reasons that threads are blocked. (Such tools may
* access blockers using method {@link #getBlocker}.) The use of these
* forms rather than the original forms without this parameter is
* strongly encouraged. The normal argument to supply as a
* {@code blocker} within a lock implementation is {@code this}.
*
* <p>These methods are designed to be used as tools for creating
* higher-level synchronization utilities, and are not in themselves
* useful for most concurrency control applications. The {@code park}
* method is designed for use only in constructions of the form:
*
* <pre> {@code
* while (!canProceed()) { ... LockSupport.park(this); }}</pre>
*
* where neither {@code canProceed} nor any other actions prior to the
* call to {@code park} entail locking or blocking. Because only one
* permit is associated with each thread, any intermediary uses of
* {@code park} could interfere with its intended effects.
*
* <p><b>Sample Usage.</b> Here is a sketch of a first-in-first-out
* non-reentrant lock class:
* <pre> {@code
* class FIFOMutex {
* private final AtomicBoolean locked = new AtomicBoolean(false);
* private final Queue<Thread> waiters
* = new ConcurrentLinkedQueue<Thread>();
*
* public void lock() {
* boolean wasInterrupted = false;
* Thread current = Thread.currentThread();
* waiters.add(current);
*
* // Block while not first in queue or cannot acquire lock
* while (waiters.peek() != current ||
* !locked.compareAndSet(false, true)) {
* LockSupport.park(this);
* if (Thread.interrupted()) // ignore interrupts while waiting
* wasInterrupted = true;
* }
*
* waiters.remove();
* if (wasInterrupted) // reassert interrupt status on exit
* current.interrupt();
* }
*
* public void unlock() {
* locked.set(false);
* LockSupport.unpark(waiters.peek());
* }
* }}</pre>
*/
public class LockSupport {
private LockSupport() {} // Cannot be instantiated.
// Hotspot implementation via intrinsics API
private static final Unsafe unsafe = Unsafe.getUnsafe();
private static final long parkBlockerOffset;
static {
try {
parkBlockerOffset = unsafe.objectFieldOffset
(java.lang.Thread.class.getDeclaredField("parkBlocker"));
} catch (Exception ex) { throw new Error(ex); }
}
private static void setBlocker(Thread t, Object arg) {
// Even though volatile, hotspot doesn't need a write barrier here.
unsafe.putObject(t, parkBlockerOffset, arg);
}
/**
* Makes available the permit for the given thread, if it
* was not already available. If the thread was blocked on
* {@code park} then it will unblock. Otherwise, its next call
* to {@code park} is guaranteed not to block. This operation
* is not guaranteed to have any effect at all if the given
* thread has not been started.
*
* @param thread the thread to unpark, or {@code null}, in which case
* this operation has no effect
*/
public static void unpark(Thread thread) {
if (thread != null)
unsafe.unpark(thread);
}
/**
* Disables the current thread for thread scheduling purposes unless the
* permit is available.
*
* <p>If the permit is available then it is consumed and the call returns
* immediately; otherwise
* the current thread becomes disabled for thread scheduling
* purposes and lies dormant until one of three things happens:
*
* <ul>
* <li>Some other thread invokes {@link #unpark unpark} with the
* current thread as the target; or
*
* <li>Some other thread {@linkplain Thread#interrupt interrupts}
* the current thread; or
*
* <li>The call spuriously (that is, for no reason) returns.
* </ul>
*
* <p>This method does <em>not</em> report which of these caused the
* method to return. Callers should re-check the conditions which caused
* the thread to park in the first place. Callers may also determine,
* for example, the interrupt status of the thread upon return.
*
* @param blocker the synchronization object responsible for this
* thread parking
* @since 1.6
*/
public static void park(Object blocker) {
Thread t = Thread.currentThread();
setBlocker(t, blocker);
unsafe.park(false, 0L);
setBlocker(t, null);
}
/**
* Disables the current thread for thread scheduling purposes, for up to
* the specified waiting time, unless the permit is available.
*
* <p>If the permit is available then it is consumed and the call
* returns immediately; otherwise the current thread becomes disabled
* for thread scheduling purposes and lies dormant until one of four
* things happens:
*
* <ul>
* <li>Some other thread invokes {@link #unpark unpark} with the
* current thread as the target; or
*
* <li>Some other thread {@linkplain Thread#interrupt interrupts}
* the current thread; or
*
* <li>The specified waiting time elapses; or
*
* <li>The call spuriously (that is, for no reason) returns.
* </ul>
*
* <p>This method does <em>not</em> report which of these caused the
* method to return. Callers should re-check the conditions which caused
* the thread to park in the first place. Callers may also determine,
* for example, the interrupt status of the thread, or the elapsed time
* upon return.
*
* @param blocker the synchronization object responsible for this
* thread parking
* @param nanos the maximum number of nanoseconds to wait
* @since 1.6
*/
public static void parkNanos(Object blocker, long nanos) {
if (nanos > 0) {
Thread t = Thread.currentThread();
setBlocker(t, blocker);
unsafe.park(false, nanos);
setBlocker(t, null);
}
}
/**
* Disables the current thread for thread scheduling purposes, until
* the specified deadline, unless the permit is available.
*
* <p>If the permit is available then it is consumed and the call
* returns immediately; otherwise the current thread becomes disabled
* for thread scheduling purposes and lies dormant until one of four
* things happens:
*
* <ul>
* <li>Some other thread invokes {@link #unpark unpark} with the
* current thread as the target; or
*
* <li>Some other thread {@linkplain Thread#interrupt interrupts} the
* current thread; or
*
* <li>The specified deadline passes; or
*
* <li>The call spuriously (that is, for no reason) returns.
* </ul>
*
* <p>This method does <em>not</em> report which of these caused the
* method to return. Callers should re-check the conditions which caused
* the thread to park in the first place. Callers may also determine,
* for example, the interrupt status of the thread, or the current time
* upon return.
*
* @param blocker the synchronization object responsible for this
* thread parking
* @param deadline the absolute time, in milliseconds from the Epoch,
* to wait until
* @since 1.6
*/
public static void parkUntil(Object blocker, long deadline) {
Thread t = Thread.currentThread();
setBlocker(t, blocker);
unsafe.park(true, deadline);
setBlocker(t, null);
}
/**
* Returns the blocker object supplied to the most recent
* invocation of a park method that has not yet unblocked, or null
* if not blocked. The value returned is just a momentary
* snapshot -- the thread may have since unblocked or blocked on a
* different blocker object.
*
* @param t the thread
* @return the blocker
* @throws NullPointerException if argument is null
* @since 1.6
*/
public static Object getBlocker(Thread t) {
if (t == null)
throw new NullPointerException();
return unsafe.getObjectVolatile(t, parkBlockerOffset);
}
/**
* Disables the current thread for thread scheduling purposes unless the
* permit is available.
*
* <p>If the permit is available then it is consumed and the call
* returns immediately; otherwise the current thread becomes disabled
* for thread scheduling purposes and lies dormant until one of three
* things happens:
*
* <ul>
*
* <li>Some other thread invokes {@link #unpark unpark} with the
* current thread as the target; or
*
* <li>Some other thread {@linkplain Thread#interrupt interrupts}
* the current thread; or
*
* <li>The call spuriously (that is, for no reason) returns.
* </ul>
*
* <p>This method does <em>not</em> report which of these caused the
* method to return. Callers should re-check the conditions which caused
* the thread to park in the first place. Callers may also determine,
* for example, the interrupt status of the thread upon return.
*/
public static void park() {
unsafe.park(false, 0L);
}
/**
* Disables the current thread for thread scheduling purposes, for up to
* the specified waiting time, unless the permit is available.
*
* <p>If the permit is available then it is consumed and the call
* returns immediately; otherwise the current thread becomes disabled
* for thread scheduling purposes and lies dormant until one of four
* things happens:
*
* <ul>
* <li>Some other thread invokes {@link #unpark unpark} with the
* current thread as the target; or
*
* <li>Some other thread {@linkplain Thread#interrupt interrupts}
* the current thread; or
*
* <li>The specified waiting time elapses; or
*
* <li>The call spuriously (that is, for no reason) returns.
* </ul>
*
* <p>This method does <em>not</em> report which of these caused the
* method to return. Callers should re-check the conditions which caused
* the thread to park in the first place. Callers may also determine,
* for example, the interrupt status of the thread, or the elapsed time
* upon return.
*
* @param nanos the maximum number of nanoseconds to wait
*/
public static void parkNanos(long nanos) {
if (nanos > 0)
unsafe.park(false, nanos);
}
/**
* Disables the current thread for thread scheduling purposes, until
* the specified deadline, unless the permit is available.
*
* <p>If the permit is available then it is consumed and the call
* returns immediately; otherwise the current thread becomes disabled
* for thread scheduling purposes and lies dormant until one of four
* things happens:
*
* <ul>
* <li>Some other thread invokes {@link #unpark unpark} with the
* current thread as the target; or
*
* <li>Some other thread {@linkplain Thread#interrupt interrupts}
* the current thread; or
*
* <li>The specified deadline passes; or
*
* <li>The call spuriously (that is, for no reason) returns.
* </ul>
*
* <p>This method does <em>not</em> report which of these caused the
* method to return. Callers should re-check the conditions which caused
* the thread to park in the first place. Callers may also determine,
* for example, the interrupt status of the thread, or the current time
* upon return.
*
* @param deadline the absolute time, in milliseconds from the Epoch,
* to wait until
*/
public static void parkUntil(long deadline) {
unsafe.park(true, deadline);
}
}