package com.pi4j.gpio.extension.mcp;
import java.io.IOException;
import com.pi4j.io.gpio.GpioProvider;
import com.pi4j.io.gpio.GpioProviderBase;
import com.pi4j.io.gpio.Pin;
import com.pi4j.io.gpio.PinMode;
import com.pi4j.io.gpio.PinPullResistance;
import com.pi4j.io.gpio.PinState;
import com.pi4j.io.gpio.event.PinDigitalStateChangeEvent;
import com.pi4j.io.gpio.event.PinListener;
import com.pi4j.io.gpio.exception.InvalidPinException;
import com.pi4j.io.gpio.exception.InvalidPinModeException;
import com.pi4j.io.gpio.exception.UnsupportedPinModeException;
import com.pi4j.io.gpio.exception.UnsupportedPinPullResistanceException;
import com.pi4j.io.i2c.I2CBus;
import com.pi4j.io.i2c.I2CDevice;
import com.pi4j.io.i2c.I2CFactory;
/*
* #%L
* **********************************************************************
* ORGANIZATION : Pi4J
* PROJECT : Pi4J :: GPIO Extension
* FILENAME : MCP23008GpioProvider.java
*
* This file is part of the Pi4J project. More information about
* this project can be found here: http://www.pi4j.com/
* **********************************************************************
* %%
* Copyright (C) 2012 - 2013 Pi4J
* %%
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
* #L%
*/
/**
* <p>
* This GPIO provider implements the MCP23008 I2C GPIO expansion board as native Pi4J GPIO pins.
* More information about the board can be found here: *
* http://ww1.microchip.com/downloads/en/DeviceDoc/21919e.pdf
* http://learn.adafruit.com/mcp230xx-gpio-expander-on-the-raspberry-pi/overview
* </p>
*
* <p>
* The MCP23008 is connected via I2C connection to the Raspberry Pi and provides
* 8 GPIO pins that can be used for either digital input or digital output pins.
* </p>
*
* @author Robert Savage
*
*/
public class MCP23008GpioProvider extends GpioProviderBase implements GpioProvider {
public static final String NAME = "com.pi4j.gpio.extension.mcp.MCP23008GpioProvider";
public static final String DESCRIPTION = "MCP23008 GPIO Provider";
public static final int REGISTER_IODIR = 0x00;
private static final int REGISTER_GPINTEN = 0x02;
private static final int REGISTER_DEFVAL = 0x03;
private static final int REGISTER_INTCON = 0x04;
private static final int REGISTER_GPPU = 0x06;
private static final int REGISTER_INTF = 0x07;
// private static final int REGISTER_INTCAP = 0x08;
public static final int REGISTER_GPIO = 0x09;
private int currentStates = 0;
private int currentDirection = 0;
private int currentPullup = 0;
private I2CBus bus;
private I2CDevice device;
private GpioStateMonitor monitor = null;
public MCP23008GpioProvider(int busNumber, int address) throws IOException {
// create I2C communications bus instance
bus = I2CFactory.getInstance(busNumber);
// create I2C device instance
device = bus.getDevice(address);
// set all default pins directions
device.write(REGISTER_IODIR, (byte) currentDirection);
// set all default pin interrupts
device.write(REGISTER_GPINTEN, (byte) currentDirection);
// set all default pin interrupt default values
device.write(REGISTER_DEFVAL, (byte) 0x00);
// set all default pin interrupt comparison behaviors
device.write(REGISTER_INTCON, (byte) 0x00);
// set all default pin states
device.write(REGISTER_GPIO, (byte) currentStates);
// set all default pin pull up resistors
device.write(REGISTER_GPPU, (byte) currentPullup);
}
@Override
public String getName() {
return NAME;
}
@Override
public void export(Pin pin, PinMode mode) {
// make sure to set the pin mode
super.export(pin, mode);
setMode(pin, mode);
}
@Override
public void unexport(Pin pin) {
super.unexport(pin);
setMode(pin, PinMode.DIGITAL_OUTPUT);
}
@Override
public void setMode(Pin pin, PinMode mode) {
// validate
if (!pin.getSupportedPinModes().contains(mode)) {
throw new InvalidPinModeException(pin, "Invalid pin mode [" + mode.getName()
+ "]; pin [" + pin.getName() + "] does not support this mode.");
}
// validate
if (!pin.getSupportedPinModes().contains(mode)) {
throw new UnsupportedPinModeException(pin, mode);
}
try {
// determine register and pin address
int pinAddress = pin.getAddress();
// determine update direction value based on mode
if (mode == PinMode.DIGITAL_INPUT) {
currentDirection |= pinAddress;
} else if (mode == PinMode.DIGITAL_OUTPUT) {
currentDirection &= ~pinAddress;
}
// next update direction value
device.write(REGISTER_IODIR, (byte) currentDirection);
// enable interrupts; interrupt on any change from previous state
device.write(REGISTER_GPINTEN, (byte) currentDirection);
} catch (IOException ex) {
throw new RuntimeException(ex);
}
// cache mode
getPinCache(pin).setMode(mode);
// if any pins are configured as input pins, then we need to start the interrupt monitoring
// thread
if (currentDirection > 0) {
// if the monitor has not been started, then start it now
if (monitor == null) {
// start monitoring thread
monitor = new GpioStateMonitor(device);
monitor.start();
}
} else {
// shutdown and destroy monitoring thread since there are no input pins configured
if (monitor != null) {
monitor.shutdown();
monitor = null;
}
}
}
@Override
public PinMode getMode(Pin pin) {
return super.getMode(pin);
}
@Override
public void setState(Pin pin, PinState state) {
// validate
if (hasPin(pin) == false) {
throw new InvalidPinException(pin);
}
// only permit invocation on pins set to DIGITAL_OUTPUT modes
if (getPinCache(pin).getMode() != PinMode.DIGITAL_OUTPUT) {
throw new InvalidPinModeException(pin, "Invalid pin mode on pin [" + pin.getName()
+ "]; cannot setState() when pin mode is ["
+ getPinCache(pin).getMode().getName() + "]");
}
try {
// determine pin address
int pinAddress = pin.getAddress();
// determine state value for pin bit
if (state.isHigh()) {
currentStates |= pinAddress;
} else {
currentStates &= ~pinAddress;
}
// update state value
device.write(REGISTER_GPIO, (byte) currentStates);
} catch (IOException ex) {
throw new RuntimeException(ex);
}
// cache pin state
getPinCache(pin).setState(state);
}
@Override
public PinState getState(Pin pin) {
// call super method to perform validation on pin
PinState result = super.getState(pin);
// determine pin address
int pinAddress = pin.getAddress();
// determine pin state
result = (currentStates & pinAddress) == pinAddress ? PinState.HIGH : PinState.LOW;
// cache state
getPinCache(pin).setState(result);
return result;
}
@Override
public void setPullResistance(Pin pin, PinPullResistance resistance) {
// validate
if (hasPin(pin) == false) {
throw new InvalidPinException(pin);
}
// validate
if (!pin.getSupportedPinPullResistance().contains(resistance)) {
throw new UnsupportedPinPullResistanceException(pin, resistance);
}
try {
// determine pin address
int pinAddress = pin.getAddress();
// determine pull up value for pin bit
if (resistance == PinPullResistance.PULL_UP) {
currentPullup |= pinAddress;
} else {
currentPullup &= ~pinAddress;
}
// next update pull up resistor value
device.write(REGISTER_GPPU, (byte) currentPullup);
} catch (IOException ex) {
throw new RuntimeException(ex);
}
// cache resistance
getPinCache(pin).setResistance(resistance);
}
@Override
public PinPullResistance getPullResistance(Pin pin) {
return super.getPullResistance(pin);
}
@Override
public void shutdown() {
// prevent reentrant invocation
if(isShutdown())
return;
// perform shutdown login in base
super.shutdown();
try {
// if a monitor is running, then shut it down now
if (monitor != null) {
// shutdown monitoring thread
monitor.shutdown();
monitor = null;
}
// close the I2C bus communication
bus.close();
} catch (IOException e) {
throw new RuntimeException(e);
}
}
/**
* This class/thread is used to to actively monitor for GPIO interrupts
*
* @author Robert Savage
*
*/
private class GpioStateMonitor extends Thread {
private I2CDevice device;
private boolean shuttingDown = false;
public GpioStateMonitor(I2CDevice device) {
this.device = device;
}
public void shutdown() {
shuttingDown = true;
}
public void run() {
while (!shuttingDown) {
try {
// only process for interrupts if a pin is configured as an input pin
if (currentDirection > 0) {
// process interrupts
int pinInterrupt = device.read(REGISTER_INTF);
// validate that there is at least one interrupt active
if (pinInterrupt > 0) {
// read the current pin states
int pinInterruptState = device.read(REGISTER_GPIO);
// loop over the available pins
for (Pin pin : MCP23008Pin.ALL) {
// is there an interrupt flag on this pin?
if ((pinInterrupt & pin.getAddress()) > 0) {
// System.out.println("INTERRUPT ON PIN [" + pin.getName() + "]");
evaluatePinForChange(pin, pinInterruptState);
}
}
}
}
// ... lets take a short breather ...
Thread.currentThread();
Thread.sleep(50);
} catch (Exception ex) {
ex.printStackTrace();
}
}
}
private void evaluatePinForChange(Pin pin, int state) {
if (getPinCache(pin).isExported()) {
// determine pin address
int pinAddress = pin.getAddress();
if ((state & pinAddress) != (currentStates & pinAddress)) {
PinState newState = (state & pinAddress) == pinAddress ? PinState.HIGH
: PinState.LOW;
// cache state
getPinCache(pin).setState(newState);
// determine and cache state value for pin bit
if (newState.isHigh()) {
currentStates |= pinAddress;
} else {
currentStates &= ~pinAddress;
}
// change detected for INPUT PIN
// System.out.println("<<< CHANGE >>> " + pin.getName() + " : " + state);
dispatchPinChangeEvent(pin.getAddress(), newState);
}
}
}
private void dispatchPinChangeEvent(int pinAddress, PinState state) {
// iterate over the pin listeners map
for (Pin pin : listeners.keySet()) {
// System.out.println("<<< DISPATCH >>> " + pin.getName() + " : " +
// state.getName());
// dispatch this event to the listener
// if a matching pin address is found
if (pin.getAddress() == pinAddress) {
// dispatch this event to all listener handlers
for (PinListener listener : listeners.get(pin)) {
listener.handlePinEvent(new PinDigitalStateChangeEvent(this, pin, state));
}
}
}
}
}
}